Eurocan | Rebuilt Can Making & Canning Machinery

Latest News

New seaming roll profiles developed for Sargiani large diameter can seamer
Read More >>
It was rocking down on the farm when alternative rock band All For One spent a weekend recording and filming at Eurocan’s assembly and rebuild workshop
Read More >>
Irish potato farmer Keogh's buy's a rebuilt Metal Box 6 vacuum seamer
Read More >>
High Shoulder Compound Lining
Read More >>
The Eurocan Cloud Manufacturing Strategy
Read More >>

Rebuilt Can Making & Canning Machinery

Rebuilt can making and canning machinery from Eurocan is employed worldwide by can makers and can fillers involved in the production of three piece welded tinplate cans, paperboard cans and can ends.

All can machinery is rebuilt according to the original manufacturers standards and specifications at our assembly and rebuild workshop near Worcester in the UK, by experienced can making machinery engineers.

Eurocan will undertake to rebuild your existing canmaking machinery, or to supply a secondhand can making machine either from our own used can machinery brokerage list or from another can making machinery dealer.

Many different terms including rebuilding, refurbishing, reconditioning, re-manufacturing and overhauling are associated with the preparation of second-hand can making machinery, and we always therefore seek to ensure the scope of work is clearly established with the customer for clarity, and to provide unrestricted access to our workshop throughout the project. Upon completion the customer is always invited to see the equipment running and complete a full buy-off check list with our engineers. All work is guaranteed as defined in our Terms and Conditions of Sale.

For all your can making and canning machinery engineering requirements contact us now.

	Metal Box 6 Vacuum Seamer Irish potato farming family Keogh's have purchased a fully rebuilt Metal Box 6 Vacuum Seamer to close their range of hand cooked crisps in paperboard cans.
	Metal Box 314 Press End Making Line A complete line for the production of 73mm diameter full aperture easy open end shells comprising a rebuilt Metal Box 314 double die press and 5CA double wheel curler with new FSG tooling and Decade tool protection system, rebuilt Grace 686 dual liner with new radial cut-off knife tooling and Grace MK4 EP compound gun system, new Nordson EcoDry compound drying oven, and all new end handling and electrical controls.
	Metal Box 334CRS Seamer Rebuilt for double seaming 73mm diameter welded cans and ends and supplied as part of a package of equipment including six Lasunie vertical retorts to a canner in South Africa.
	FMI A-365 Vertical Die Flanger Rebuilt and specially adapted for double end flanging of paperboard cans. New change parts, flanging dies and limit rings manufactured by Eurocan. Safety guarding and electrical controls to be completed by customer at site.
	Grace 686 Dual Liner Tooling New radial cut-off knife tooling supplied to Ardagh Metal Packaging (formerly Impress) for their existing 686 dual liners.
	Metal Box 6DS Seamer Rebuilt for HotCan the self heating meal in a tin produced by Heat Food & Drink Ltd in the UK. Fitted with new tooling for 99mm diameter three piece welded tinplate cans, a stainless steel wire mesh safety enclosure, and all new electrical controls with a CE Mark and EU Declaration of Conformity.
	Metal Box 6 Vacuum Seamer Rebuilt for Westlers after being removed from their production line for seaming 99mm diameter welded cans with non-easy open ends in a vacuum environment.
	MGR Curler Liner Rebuilt for lining and curling 25 litre round pail bottoms and retrofitted with all new electrical controls, new Eurocan EF compound gun, automatic upstacker unloader and full safety enclosure with CE Mark and EU Declaration of Conformity.
	Metal Box 65D Spin Flanger Rebuilt for a can maker in Saudi Arabia to flange 99mm diameter welded can bodies. New spin flanging tooling engineered, manufactured and assembled in Eurocan toolroom. Tooling design based on later Metal Box 85D version with improved bearing and flanging roll setting features.
	Metal Box 10-6C Seamer Rebuilt for a can maker in Saudi Arabia to seam 99mm diameter welded flanged cans. Retrofitted with a random can infeed timing spiral and all new electrical cabinet.
	Meritermica Duplex Slitter Purchased from Spain on behalf of a Middle East can maker having already been rebuilt. Audit and buy-off completed by Eurocan engineer.
	Metal Box 1A Vacuum Seamers A pair of 1A vacuum seamers rebuilt and re-tooled for a Middle East customer and set-up and tested with their can and end samples prior to despatch.
	Metal Box 1A Seamers A pair of 1A's rebuilt for a North Africa customer and fitted with new seaming chucks and rolls, new drive motors and electrical controls.
	Ocsam Blank Transfer System Purchased for a UK can maker, rebuilt and adapted for large size blanks to link an NCC duplex slitter to a Soudronic SBW welder.
	Metal Box 200 Vacuum Capper Rebuilt and re-tooled for Cluny Fish in Scotland and installed at Baxters for contract packing of fish pate in glass jars closed in a steam vacuum environment.
	Bliss 1831 Press Purchased in the USA after audit by Eurocan engineer and fully rebuilt for a can maker in France at our UK assembly and rebuild workshop according to their exact specifications.
	Angelus 60L Seamer Rebuilt by our customer with all basic machine replacement parts, new change parts, new seaming chucks and rolls, and single screw cover feeder retrofit supplied by Eurocan.
	Crabtree Marquess Three Colour Printing Line Dismantled at site in Sweden, asbestos materials removed and disposed of according to EU legislation, marked and packed for re-assembly and shipped to Central America for re-assembly.
	Metal Box 6 Vacuum Seamer Rebuilt for a Middle East meat canner for 73mm diameter round cans and adapted for extended can height range.
	Metal Box 6 Vacuum Seamer Rebuilt for a UK meat canner for double seaming 99mm diameter three piece welded cans and ends.
	Metal Box 334CRS Seamer Rebuild commissioned by an international composite canmaker for a new customer installation including adapting for double seaming paperboard cans, new seaming chucks and rolls to their specifications, stainless steel and polycarbonate panel safety enclosure, new electrical control cabinet, and a CE Mark and EU Declaration of Conformity.
	Metal Box 85D Spin Flanger Rebuilt and re-tooled for Impress (now Ardagh) in Holland with all engineering, manufacturing and assembly of new change parts and tooling done 'in-house' at Eurocan toolroom.
	Metal Box 6 Steam Vacuum Seamer Rebuilt and specially adapted to facilitate either steam or vacuum seaming of round 73mm diameter cans from 50mm to 200mm high for a meat canner in Syria.
	Lanico Rapid Seamers A pair of Lanico Rapid seamers rebuilt and fitted with new electrical controls for a can maker in Colombia.
	Crabtree Marquess Tandem Printing Line A two colour Crabtree printing line dismantled at a UK factory, marked and prepared for re-assembly including removal and disposal of asbestos materials, and shipped to a new can making company in Bolivia for re-installation.
	Cameron 226 Vacuum Seamer Rebuilt for a Dutch meat canner and converted for seaming 73mm diameter round tall cans, with all new change parts and tooling, a new spiral can infeed system, magnetic can discharge take-off conveyor, and all new electrical controls with an electronic inverter for machine speed adjustment.
	Metal Box 6 Vacuum Seamer Rebuilt and adapted for seaming 73mm diameter x 200mm high welded cans, with a full stainless steel safety enclosure, infeed and discharge conveyors and all new electrical control system for a Jordanian meat canner.
	Metal Box 334CR-C Seamer Rebuilt to double seam 99mm diameter welded cans for a Middle East oil canner.
	Carnaud 584 Can Seamer A semi-automatic rectangular can seamer commissioned by a can maker in India for one of their customers, and supplied with a custom designed manual clinching unit. Click here to see how not to feed clinched cans into this seamer...
	Lanico Rapid and RV248 Can Seamers Purchased and rebuilt for a South American can maker to double seam 73mm diameter thtree piece cans and non-easy open ends.
	Metal Box 6DS Seamer Rebuilt for double seaming 99mm diameter welded tinplate cans for a Saudi Arabian motor lube canner.
	Klinghammer VA170 Seamer New rectangular change parts and tooling designed and manufactured for installation on the customers existing machine.
	Blema KEAXG 100 Liner Rebuilt for high shoulder compound lining of 153mm diameter NEO tinplate ends for seaming on paperboard cans, and retrofitted with our MK6 EF compound gun system.
	Lanico BF 280AE Necker / Flanger / Seamer Rebuilt and fitted with new tooling manufactured in the Eurocan toolroom, and with new electrical controls for a three piece welded aerosol can maker in in India.
	Metal Box 10-6C Seamer Fully rebuilt and adapted for seaming an aluminium two piece 'pot' with an aluminium full aperture easy open end for an international fish canner. All engineering, change parts and tooling done 'in-house' by Eurocan.
	Lanico BFD 326AE Necker / Flanger / Seamer A pair of 326AE's fully rebuilt and supplied with all new change parts and tooling for 73mm diameter aerosol cans and installed with a new CanMan welder and a rebuilt Bonfiglioli tester.
	Soudronic VEAW K50 Welded Can Making Line A complete three piece can making line comprising a rebuilt Metal Box 3/3 duplex slitter, rebuilt welder, new ORC striping system, new electrical curing oven, rebuilt Metal Box 151F die flanger, rebuilt BLH 301R beader and a rebuilt Metal Box 700GCR seamer with all new can handling and electric controls and fitted with change parts and new tooling for 99, 127, 153 and 190mm diameter milk powder cans.
	Bliis 821 Press Fully rebuilt for a UK can maker with a new electrical control system with safety interlocks for interface with customers own manufacture safety enclosure.
	Metal Box 10-4C Seamer Commissioned by paperboard can maker Sonoco Consumer Products for Jacobs Bakery Ltd to close 99mm diameter composite cans with tinplate bottom ends filled with dry snack food products.
	Metal Box 6 MSLF Seamer Fully rebuilt and modified for a Norwegian contract packer to close paperboard cans filled with coffee in a Nitrogen atmosphere, with a modified straight line can infeed (MSLF) system, and fully safety enclosure and electrical controls with CE Mark and EU Declaration of Conformity.
	Metal Box 334CRS Seamer Fully rebuilt and adapted for seaming paperboard cans with tinplate bottom ends filled with tea bags for Tetley Tea, incorporating a bespoke safetry enclosure, random can infeed spiral timer unit, extended lid feed system and all new electrical controls.